Oil Expeller VK 130 (10 TPD) is equipped with a 3 phase motor and heavy duty bearings for an improved performance with low noise. The entire thrust of the worms is absorbed by the roller bearings and thus, gear section and shafts are not disturbed while withdrawing the pressure worms and collars.

Oil Expeller VK 150 (15 TPD) is an economical answer to oil extraction industry with its excellent capacity of 15TPD. In this model of expeller, there is an added advantage due to which the withdrawal of worm shaft and collars can be done easily and conveniently with even disturbing the gears as the total thrust of the worms is absorbed by the attached large spherical roller bearings.

Edible Oil Plant is equipped with a 3 phase motor and heavy duty bearings for an improved performance with low noise.Known for its low noise and improved performance, demand for the products we provide is increasing at a rapid rate

A new generation in oil extraction, Oil Expeller Virat 160 (16 TPD) produces an excellent quality cake of natural color without any charring or burning effect. Integrated with self-lubrication system, this model of oil expeller is sturdy in construction with low maintenance requirement.

Oil Expeller VK 200 (20 TPD) is an advanced model in the series with cast iron body and steel fabricated base for precise alignment. This expeller is capable of extracting the best quality oil from all known seeds.

By offering the Oil Mills we ensure that it will produce the cake with natural color and of excellent quality, with no burning or charring effect. Integrated excellent process parameters ensure the retention of oil in cake in an accurate manner. Motor that has been attached to this Oil Mills are selected wisely, in order to ensure minimum consumption of power. We guarantee the extraction of high quality oil, because of the excellent construction of chamber and ultimate worm assembly design.

Oil Expeller Virat 210 (18 to 21 TPD) produces excellent quality cake of natural color with no charring or burning effect. There are integrated superior process parameters for accurate retention of oil in the cake. For minimal power consumption, in this expeller, the selection of motor is wisely done taking into consideration the possibility of peak load that can arise due to inconsistent feeding. Superior of quality of oil is extracted from the expeller due to well-designed worm assembly and chamber construction.

Oil Expeller Viraat 500 (50 to 60 TPD) is integrated with an alloy steel constructed expeller shaft fitted with high pressure worms that are easily replaceable without disturbing its position. Superior process parameters with well-designed worm assemble and excellent chamber construction result in accurate retention of oil in cake and also the excellent quality of the expelled oil. Taking into consideration the inconsistent feeding and the peak load caused due to it, the selection of motor in the expeller is made for lower power consumption.

Prior to expelling, oil seeds are properly heated and conditioned with Cookers / Heating Kettles. Oil bearing cells get opened up when subjected to controlled heat and moisture thus resulting in maximum oil yield.

With complete steel fabrication, each compartment of the cooker is attached with hydraulically tested steam heated jackets through welding with studs. There are attached hinged doors in all the compartments except the top one for easy access.

All the necessary fittings including pressure gauges, valves, steam traps, relief valves and thermometer are included in the cookers. Steam jackets are indirectly heated by steam and bottom stage insulation in the cookers avoids unnecessary heat losses. Insulation can be provided at extra cost.

For small cookers, the bottom compartment is provided with an open steam spray whereas for other sizes, it is provided at the top and bottom compartments.

Retention time in each stage, seed temperature, moisture content and depth can be easily controlled.

Carries biparted agitators in each compartment, the vertical shaft is driven from an independent electric motor through V-Belt and vertical cooled worm type speed reduction gear box.

higher figures are for starting up and the lower figures are for steady running.

Oil Expeller Virat 1000 (150 TPD) produces excellent quality natural colored cake without any charring or burning effect. The drive housing in the expeller is well protected and fitted with level indicators that monitor the oil level in the machine for safety.

Before expelling, Cookers / Heating Kettles are installed for proper heating and conditioning of oil seeds. In this, the oil bearing cells are subjected to controlled heat and moisture that results in their opening for maximum oil yield.

For each compartment in the cooker, there are integrated steam heated jackets that are hydraulically tested before assembly and suitable welded with studs. With all steel fabrication, for easy access in the cookers, all compartments except the top one are provided with hinged doors.

Indirectly heating of steam jackets is done by the steam and the bottom stage insulation of cooker results in preventing unnecessary heat losses. There are provided all the fittings with the cooker including pressure gauges, valves, steam traps, relief valves and thermometer. Insulation can be provided at extra cost.

Bottom compartment of smaller cookers is provided with an open steam spray whereas for other sizes, it is provided at the top and bottom compartments.

Easy to control retention time in each stage, seed temperature, moisture content and depth

The vertical shaft is driven from an electric motor that is independent. It carries biparted agitators and driven through V-belt and vertical cooled worm type speed reduction gear box.

Higher figures are for starting up and the lower figures are for steady running.

We are providing Oil Extraction Machine VK-130